pc-laptop.co的部落格

Maintenance and instructions for the TOPCON BC-L2A adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Description for COMIO M7000 battery:

1. Try to use the original charger. Compared with the original charger, the non-original charger has a certain gap between the output current and the voltage. The long-term use of the non-original charger can not only reduce the service life of the mobile phone battery, but also cause the battery of the mobile phone to explode and catch fire.

2. Lithium-ion batteries should be protected from full discharge during use (use a black screen to power down).

3. Do not place the phone in a high temperature environment. When the mobile phone is exposed to the sun for a long time, it will cause the battery temperature to suddenly increase or even explode.

4. should try to keep the phone away from the water source, in case the battery is short-circuited by moisture.

5. If the battery has abnormal conditions such as drum belly and damaged casing, stop using it immediately and replace it with a new one.

How to reduce cell phone radiation ?

1. When the mobile phone is called out, it is best to keep the mobile phone away from the head to avoid radiation on the head when the mobile phone emits more power.

2. Minimize the time each time you use your phone and the number of times you use your phone every day. When it is necessary to talk for a long time, it is more scientific to alternate between left and right ears or to use headphones.

3. When the mobile phone signal becomes weak, the mobile phone will automatically increase the transmitting power of the electromagnetic wave. At this time, do not put your ear close to the mobile phone.

4. do not pick up the phone in the corner, the signal coverage in the corner of the building is relatively poor, so it will increase the radiation power of the phone to a certain extent. For the same reason, when you are in a small, enclosed environment such as an elevator, you should avoid making calls.

5. Do not walk around when you touch the mobile phone. Frequent moving positions will cause the strength of the received signal to fluctuate, causing unnecessary short-time high-power transmission.

Maintenance and instructions for the APPLE A1347 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Description for TECNO BL-39LT battery:

1. Try to use the original charger. Compared with the original charger, the non-original charger has a certain gap between the output current and the voltage. The long-term use of the non-original charger can not only reduce the service life of the mobile phone battery, but also cause the battery of the mobile phone to explode and catch fire.

2. Lithium-ion batteries should be protected from full discharge during use (use a black screen to power down).

3. Do not place the phone in a high temperature environment. When the mobile phone is exposed to the sun for a long time, it will cause the battery temperature to suddenly increase or even explode.

4. should try to keep the phone away from the water source, in case the battery is short-circuited by moisture.

5. If the battery has abnormal conditions such as drum belly and damaged casing, stop using it immediately and replace it with a new one.

How to reduce cell phone radiation ?

1. When the mobile phone is called out, it is best to keep the mobile phone away from the head to avoid radiation on the head when the mobile phone emits more power.

2. Minimize the time each time you use your phone and the number of times you use your phone every day. When it is necessary to talk for a long time, it is more scientific to alternate between left and right ears or to use headphones.

3. When the mobile phone signal becomes weak, the mobile phone will automatically increase the transmitting power of the electromagnetic wave. At this time, do not put your ear close to the mobile phone.

4. do not pick up the phone in the corner, the signal coverage in the corner of the building is relatively poor, so it will increase the radiation power of the phone to a certain extent. For the same reason, when you are in a small, enclosed environment such as an elevator, you should avoid making calls.

5. Do not walk around when you touch the mobile phone. Frequent moving positions will cause the strength of the received signal to fluctuate, causing unnecessary short-time high-power transmission.

What is the run time of MICROSOFT G16TA047H battery?

MICROSOFT G16TA047H have two main ratings on them: Volts and Amperes. Because size and weight of batteries is limited when compared to larger batteries such as car batteries, most companies show their ratings with Volts and Milliamperes. One thousand Milliamperes equals 1 Ampere. When buying a battery, select batteries with the most Milliamperes (or mAh). Batteries are also rated by Watt-Hours, perhaps the simplest rating of all. This is found by multiplying the Volts and the Amperes together.

How can I maximize the performance of my MICROSOFT battery? There are several steps you can take to help you get maximum performance from your MICROSOFT battery:

If you are not using the internet turn off your wifi connection and lower the intensity of your backlight (hold down function and move the arrows up or down to change intensity).

Let the power of the batteries (15%) drain to 0% When you use your brand new Battery first time. And then full charge it(usually chrage it full 12 hours) and let it drain to 0% again. Do this for 2~3 cycles.

Don't leave your computer plugged in constantly when it is not in use.

Keep your notebook in a well ventilated place and keep it cool. Your battery works faster when it is hot because it is creating more energy and is burning out faster.

Unplug any external devices that you don't need such as using a usb or bluetooth mouse .

If you are not using the device, do not put your laptop battery in the device for an extended period of time.

Maintenance and instructions for the ASUS ADP-330AB_D adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

Maintenance and instructions for the KENWOOD KSC-25 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

What is the run time of OPPO XE201 battery?

OPPO XE201 have two main ratings on them: Volts and Amperes. Because size and weight of batteries is limited when compared to larger batteries such as car batteries, most companies show their ratings with Volts and Milliamperes. One thousand Milliamperes equals 1 Ampere. When buying a battery, select batteries with the most Milliamperes (or mAh). Batteries are also rated by Watt-Hours, perhaps the simplest rating of all. This is found by multiplying the Volts and the Amperes together.

OPPO XE201 Batteries

100% OEM Compatible with your OPPO XE201 watch.

Lithium Ion battery technology.

Convenient and secure online purchasing.

Satisfaction guaranteed or your money back.

1 Year Warranty on all OPPO Replacement Batteries.